email: sales@sissling-group.co.uk
20 Fitzwilliam Steet
Bradford
West Yorkshire
BD4 7BL
United Kingdom
D005SNG Smove Door Buffer Lightweight (Handle Side)
A soft close door buffer, the Smove D005 is inserted into the cabinet side opposite the hinges.
For optimal performance Salice recommend that the buffer is located in the center of the side panel.
50mm x 10mm dia
For wood based and alu-framed doors over 1600mm height it may be necessary to insert two Smove, one in the upper part of the door and one in the lowerpart. Opposite the hinges.
find out more
D045XXG/16 Plastic Spacer For Smove GREY
A 20mm high plastic spacer block to enable part D076SN9 Diecast Smove Housing to be utilised on Face Frame cabinets.
find out more
D076SN9 Smove Housing - Diecast Metal
Adapter for the Smove door buffers, eliminates the need to drill the cabinet so easily installed as a cabinet upgrade. Fixed with double sided tape (supplied) but can be further fixed with supplied screw.
find out more
S2BX83H9 Symmetrical Steel Screw Cover
Hides the hinge screw and gives projects a neatly finished impression.
find out more
DP4SNG PUSH Adjustable Release Catch GREY
The adjustable Push consists of a release device and a screw-fixed adapter which have been developed to improve the locating action of the system.
The adjustable Push has a depth adjustment facility with a range of -1mm to +2.5mm which is controlled by a small adjuster wheel located at the back of the adapter.
In addition, the adapter had a sideways adjustment facility of +/-2mm. This is achieved by loosening two screws and adjusting the position of the adapter using the elongated holes.
This item is used in conjunction with DP29SNGR shown below. NB This catch will NOT work with standard concealed sprung cabinet hinges.
find out more
DP29SNGR PUSH Retaining Catch GREY
NB This catch will NOT work with standard concealed sprung cabinet hinges.
find out more
