email: sales@sissling-group.co.uk
20 Fitzwilliam Steet
Bradford
West Yorkshire
BD4 7BL
United Kingdom
D005SNG Smove Door Buffer Lightweight (Handle Side)
A soft close door buffer, the Smove D005 is inserted into the cabinet side opposite the hinges.
For optimal performance Salice recommend that the buffer is located in the center of the side panel.
50mm x 10mm dia
For wood based and alu-framed doors over 1600mm height it may be necessary to insert two Smove, one in the upper part of the door and one in the lowerpart. Opposite the hinges.
find out more
D045XXG/16 Plastic Spacer For Smove GREY
A 20mm high plastic spacer block to enable part D076SN9 Diecast Smove Housing to be utilised on Face Frame cabinets.
find out more
DP4SNG PUSH Adjustable Release Catch GREY
The adjustable Push consists of a release device and a screw-fixed adapter which have been developed to improve the locating action of the system.
The adjustable Push has a depth adjustment facility with a range of -1mm to +2.5mm which is controlled by a small adjuster wheel located at the back of the adapter.
In addition, the adapter had a sideways adjustment facility of +/-2mm. This is achieved by loosening two screws and adjusting the position of the adapter using the elongated holes.
This item is used in conjunction with DP29SNGR shown below. NB This catch will NOT work with standard concealed sprung cabinet hinges.
find out more
C2AFA99 Sprung Hinge 0mm Crank 165d Full Overlay
A standard sprung hinge compatible with all .
Allows a cupboard door to open 165degrees.
Mounting Plates Are NOT Included And Must Be Ordered Seperately
find out more
Salice 200 Series Push to Open Cabinet HingesThe PUSH-System is a self opening system for the doors of all types of handleless cabinet furniture.  It consistes of a series of self-opening hinges, release devices (the PUSH) that can be fitted to the top, base or side panel of the cabinet, and retaining catches to be fitted to the back of the door. The PUSH release device is available in a mechanical version that is fitted to the cabinet side using screws or adhesive strip, and a magnetic version that can be mounted using a holder or recessed into the edge of the cabinet. The retaining catches can be pressure-fixed, screw-fixed or fitted with adhesive strip. For doors over 1600mm in height the use of two release devices is recommended.
The adjustable PUSH consists of a release device and a screw fixed adapter which have been developed to improve the locating action of the system. The adjustable PUSH has a depth adjustment facility with a range of -1mm to +2.5mm which is controlled by a small adjuster wheel located at the back of the adapter. In addition the adapter has a leteral adjustment facility of +/-2mm. This is achieved by loosening the two fixing screws and adjusting the position of the adapter using the elongated holes. Use the links below to view 200 Series Salice Cabinet Hinges |
Adjustable PUSH - Techinical Information